The number of coulombs (or amount of current) that will exit the battery of cells (in series) is the same as the one exiting a single cell (because they are mounted in series).
Ah FUCK, you are right. My apologies then. The math was not necessary after that point. But thanks for delineating it. It surely helps.
AA it is then, 5-6 slots pack on the bottom. Should we use one of the USB ports for the DC power connector?
Wait, didn't you say "a single gigabit ethernet"?
I meant if you wanted 1Gb/s ethernet, but when you/
>>185 said
1 Ethernet 1Gb/s? [do you want 2? I always wanted to 2, but USB can be used]
Yeah, too much extra complexity for not that much usefulness. Just use USB if needed.
I thought you did not want an ethernet at all, instead of thinking that you only wanted 1 ethernet port and the other could be USB, or that making 1Gb/s is more complicated. It's my fault for not elaborating.
We have options for the hub, since it will be bento box style. And we can make the usb ports wired, but with snaps on the bottom, in case you do not want them hanging or bouncing (so that you can attach your USB peripherals, whatever they are). Unless you want them to either buy their own USB cables themselves by leaving the USB ports firm, or provided in the kit. We can even use mini or micro usb, if absolute required (which I seriously doubt, since USB ports are around the same size of ISO keys (0.750 inches, 19.05 mm)). Sample:
3 internal (in the hub), 1 external (power?)
RCtl fn? Sup LMet Space RMet RClic RCtl ←↓→
┌─────────────┬───────────────┬─────────────┐
│ │ │ │
│ ■■□ │ ■■□ │ ■■□ │
│ ■■□ │ ■■□ │ ■■□ │
│ │ │ │
└─────────────┴───────────────┴─────────────┘
4 2x2 USB ports internal
RCtl fn? Sup LMet Space RMet RClic RCtl ←↓→
┌─────────────────────┬─────────────────────┐
│ ■■□ │ □■■ │
│ ■■□ │ □■■ │
│ ■■□ │ □■■ │
│ ■■□ │ □■■ │
└─────────────────────┴─────────────────────┘
2 in, 2 out
RCtl fn? Sup LMet Space RMet RClic RCtl ←↓→
┌─────────────────────┬─────────────────────┐
│ │ │
│ ■■□ │ □■■ │
│ ■■□ │ □■■ │
│ │ │
└─────────────────────┴─────────────────────┘
4 out. etc.
Want me to make a PS file out if it, or some other CAD file? AutoCAD DXF? .stl?
So you want add an open TTL or JTAG? Should we make it USB?
PS
HOLY SHIT, THERE'S A BOARD LIKE IT, BUT USES LAME HDMI:
http://en.wikipedia.org/wiki/Trim-Slice
These are awesome too:
https://en.wikipedia.org/wiki/Cotton_Candy_%28single-board_computer%29
https://en.wikipedia.org/wiki/CuBox