Generic PC help thread.

I'll make this short.

PC: Has computer parts.
Issue: Boot up is lagged, black screen after mobo screen, integrated nic fails.
Issue2: Figured it was ram, bought new ram, install ram, left "damaged" ram in, boot, it boots with about 2 seconds of black screen instead of 5 mins.
Issue3: Remove Ram "Damaged" doesn't boot at all, no-post beeps, nothing, dead. HDD spins, all the lights say "ON" but video card not sending any signal to the Monitor - Tried two diffrent monitors. No post beeps.
Issue4: Put "Damaged" ram back in, boots up as per-normal.
Issue5: WTF?

>>7
What >>8 and >>9 said. , the "Pinset? what?" comment is short for: OBVIOUSLY I ASSUME YOU BOUGHT THE FUCKING PINSET SINCE IF YOU DIDN'T IT WOULD NOT FIT IN THE FUCKING SLOT! DDR AND DDR2 AND RDRAM ARE NOT PHYSICALLY COMPATIBLE, NOW ARE THEY?

I'm a 23 yr old IT pro, with a BS in CS, motherfucker. Good job on giving us no details other than "PC: Has computer parts.
Boot up is lagged, black screen after mobo screen, integrated nic fails. Figured it was ram, bought new ram, install ram, left "damaged" ram in"
I felt that informing us that it had PC parts instead of a dead rat with a car battery hooked up to it metlted onto a PCB was very help, BTW.

I HAVE AN IDEA, HAVE YOU TRIED A DIFFERENT MOTHERBOARD? Try that, THEN come back, call us a bunch of 12 yr old v1de0 gam3rz again, and we'll go from there.