How to set my RAM to 2.5-3-3-6 ?

I have 2 sticks of Corsair 1024 MB 400 MHz CL2 DDR-RAM (CMX1024-3200C2) in my PC.
They are rated 2.5-3-3-6 on AMD Systems.
My BIOS is set to Auto and it sets following parameters:

Memclock index Value (MHz)      400 MHz
CAS# latency (Tcl)              3
Min RAS# active time (Tras)     8T
RAS# to CAS# delay (Trcd)       3T
Row precharge Time (Trp)        3T
Row cycle Time (Trc)            11T
Row refresh cyc Time (Trfc)     13T
Read-to-Write Time (Trwt)       5T
Write Recovery Time (Twr)       3T
1T/2T Memory Timing             2T

I think this is not 2.5-3-3-6.
What do I have change to get my RAM running in 2.5-3-3-6 ?
Also how do I find out if the RAM is running in Dual Channel Mode ?

U MUST PUT DUEL CHANELL STICKER ON FOR SPEED VROOM VROOM

Read your motherboard manual. Setup and overclocking procedures vary between motherboard manufacturers and BIOS types. The manual will also specify which slots you have to put the memory into to run in dual channel.

>>2

V-TECH JUST KICKED IN YO!

Someone explain how you get 2.5?

>>5
Devide 5 by 2.